SHEAR POWER CORP.

Demolition Equipment & Specialty Attachments 

1-844-747-7697 XCENTRIC RIPPER, fortress SHEARS, xCENTRIC CRUSHER, HIGH REACH BOOMS, MATERIAL HANDLERS, CONCRETE PROCESSORS

BUILTRITE STATIONARY ELECTRIC AUTO DISMANTLER 2100-SE (2012) - USED

Lift Capacity (Less attachment)
• 22,300 Lbs. (10,136 Kg.) @ 10’ (3M) R
• 13,900 Lbs. (6,318 Kg.) @ 15’ (4.57 M) R

• 9,100 Lbs. (4,136 Kg.) @ 20’ (6M) R
• 6,300 Lbs. (2,864 Kg.) @ 25’ (7.6M) R

Boom Data
• Horizontal Reach = 30’ (9.1M)
• Fabricated design, high yield steel construction.
• 3” (76mm) boom pivot and 2.5” (63mm) cylinder pins. • Magnesium bronze bushings at all boom pivot points.

Boom Cylinders
• Two (2) 6” (152mm) bore x 36” (914mm) stroke x 3” (76mm) rod main boom cylinders.

• One (1) 7” (178mm) bore x 36” (914mm) stroke x 3.5” (89mm) rod, jib boom cylinder.
• Double acting, heavy walled, honed cylinder tube with cushioned stops.
• Wear rings on both pistons and glands.
• Rods with heavy chrome plating.
•Accumulators on main lift cylinders to cushion shock loading.

Swing System
• Standard, non-continuous rotation with a 38” (965mm) diameter turntable bearing, powered by two swing motors and planetary gear boxes.

Control Deck
• Central control console with instrumentation and start/ stop controls.
• Foot or hand operated swing control.

Power Source
• One (1) 75 HP 460 Volt 3 Phase, Totally Enclosed, Fan Cooled (T.E.F.C.) electric motor.
• Uses approximately 35-40 Kw/Hr 

​​
Price: Call for details 

  • WARRANTY OPTIONS AVAILABLE

Electrical Package
• Starter, phase sequence monitor, control accessories group are all in Nema 4 enclosure. Start/stop controls on control console. Electric slip ring when continuous rotation is required. Main breaker base or power unit mounted.

Pedestal Base
• 33” (838mm) high pedestal base with inspection port hole.

Hydraulic System
• 150 Gallon (568 L) hydraulic reservoir with suction and return lters, stack type control valves with main relief and safety port relief for boom function.
• One triple gear pump.
• Hydraulic oil cooler. 3HP motor drives fan and AC compressor.
• Shutoff valves, heavy walled tubing & multi-wire hose throughout system.
• 2500 PSI (172 Bar) operating system.

Operator’s Cab
• 38” (965mm) x 51” (1,295mm), fully insulated
• Equipped with a sliding door, sliding window, wiper/washer, de-froster, dome light, deluxe bucket seat, radio/CD and air conditioning.

Miscellaneous
• Hydraulic Tank Filled.
• Unit greased and tested prior to shipment.
• Manual, centralized grease system. Auto Lube systems available.